رزومه


EN
دکتر مصطفی رضایی

دکتر مصطفی رضایی

استاد

rezaei@sut.ac.ir

دانشکده/پردیس: مهندسی پلیمر

مقطع تحصیلی: دکترای تخصصی

رزومه
EN
دکتر مصطفی رضایی

استاد دکتر مصطفی رضایی

rezaei@sut.ac.ir
دانشکده/پردیس: مهندسی پلیمر مقطع تحصیلی: دکترای تخصصی |

My affiliation

​​​​Mostafa Rezaei, Ph.D.

Professor of Polymer Eng.

Faculty​ of Polymer Engineering 
Sahand University of Technology
Sahand New Town, Tabriz, Iran
P.O.Box: 51335-1996
Postal Code: 5331817634​
Tel:+98-41-33459086 
Fax: +98-41-33444313

https://sut.ac.ir​

https://sut.ac.ir/ipm

نمایش بیشتر

مقالات

#عنوان مقالهنویسندگاننشریه/همایشتاریخنوع
 
۱۲۱سینتیک تخریب حرارتی پلی‌استایرن و پلی متیل متاکریلاتحمیدرضا عظیمی، مصطفی رضائی، مجید جمالی, علی چرچیمجله مهندسی شیمی ایران2009مقاله در نشریه
۱۲۲مطالعه اثر عوامل پف‌زای مختلف روی ریز ساختار و ضریب انتقال حرارت فوم سخت پلی‌یورتانابراهیم اسمعیل¬نژاد، مصطفی رضائی، سعید شکوری، میرکریم رضویمجله مهندسی شیمی ایران2009مقاله در نشریه
۱۲۳Thermo-Oxidative Degradation of MMA-St Copolymer and EPS Lost Foams: Kinetics StudyH. R. Azimi, M. Rezaei, F. AbbasiThermochimica Acta2009مقاله در نشریه
۱۲۴Fracture behavior and environmental stress cracking resistance (ESCR)of HIPS/PE blends and the effect of compatibilization on their propertiesM. Khodabandelou, M.K. RazaviAghjeh, M. RezaeiEngineering Fracture Mechanics2009مقاله در نشریه
۱۲۵The Effect of Alternative Blowing Agents on Microstructure and Mechanical Characteristics of Rigid Polyurethane FoamE. Esmaeilnezhad, M. Rezaei, M. K. RazaviIranian Polymer Journal2009مقاله در نشریه
۱۲۶Isokinetic Relationships to Evaluate Thermal Degradation Kinetics Parameters of MMA-St Copolymer and EPS Lost FoamsHamid Reza Azimi, Mostafa Rezaei, Farhang Abbasi, Yahya Bahluli12th Iranian Chemical Engineering Congress2008مقاله در همایش
۱۲۷Investigation of the effect of Microstructure and Density on the thermal properties of ridid Polyurethane Foams with Alternative Blowing AgentsEsmaeilnezhad, Mostafa Rezaei, Mir Karim Razavi aghjeh, Mohsen Khanzadeh12th Iranian Chemical Engineering Congress2008مقاله در همایش
۱۲۸Relationship between Mechanical properties and Microstructure of Rigid Polyurethane Foams with Alternative Blowing AgentsE. Esmaeilnezhad, M. Rezaei, S.Shakoori and M.¬KhanzadehThe 5th International Chemical Engineering Congress2008مقاله در همایش
۱۲۹Drying Kinetics and Thermal Properties of Polymer Latex Coating Used in Lost foam CastingS. Shakoori, M. Rezaei, F. Abbasi, E. Esmaeilnezhad and Y. BahloliThe 5th International Chemical Engineering Congress2008مقاله در همایش
۱۳۰Film Formation and Drying Kinetics of Polymer Latex Coatings Used in Lost foam CastingS. Shakoori,M. Rezaei, F. Abbasi, E.Esmaeilnezhad42nd world polymer congress2008مقاله در همایش
۱۳۱Alternative Ozone Friendly Blowing Agents to CFC's in Rigid Polyurethane Foams: Compressive Strength, Creep and Stress Relaxation BehaviorE. Esmaeilnezhad, M. Rezaei, M. K. Razavi Aghjeh, S. Shakoori, M.Khanzadeh42nd world polymer congress2008مقاله در همایش
۱۳۲Kinetics of thermal degradation of MMA-St and EPS lost foams in non-isothermal conditionH. R. Azimi,M. Rezaei, F. Abbasi, A. Charchi, Y. Bahluli42nd world polymer congress2008مقاله در همایش
۱۳۳Radiation Induced Graft Copolymerization of MMA Monomer onto UHMWPE: Adhesion ImprovementH. G. Kalteh, M. Rezaei, N. Sheikh and F. AbbasiJournal of Applied Polymer Science2008مقاله در نشریه
۱۳۴Microstructure, Permeability and Rheological Behavior of Lost Foam Refractory CoatingsY. Akbarzadeh, M. Rezaei, A.A. Babaluo, A. Charchi, H. R. Azimi and Y. BahluliSurface and Coating Technology2008مقاله در نشریه
۱۳۵Non-Isothermal Degradation Kinetics of MMA-St Copolymer and EPS Lost FoamsH. R. Azimi, M. Rezaei, F. Abbasi, A. Charchi, Y. BahluliThermochimica Acta2008مقاله در نشریه
۱۳۶Gamma-Irradiationgraft copolymerization of MMA monomer onto UHMWPEH. G. Kalteh, M. Rezaei, F. Abbasiand N. Sheikh8th International Seminar on Polymer Science and Technology2007مقاله در همایش
۱۳۷Thermal Properties, Rheology and Morphology of Polymer Latex Coating Used in Lost Foam CastingS. S. Chavoshi, M. Rezaei, S. Shakori and Y. Bahloli8th International Seminar on Polymer Science and Technology2007مقاله در همایش
۱۳۸Thermal analysis of acrylamide polymeric network used for nanopowders preparationM. Thamasebpour, A. A. Babalou, M. Rezaei and M. K. Razavi11th Iranian Chemical Engineering Congress2006مقاله در همایش
۱۳۹Gamma radiation grafting of acrylate groups onto the UHMWPE surfaceH. G. Kalteh, M. Rezaei, K. Jarrahian and N. Sheikh11th Iranian Chemical Engineering Congress2006مقاله در همایش
۱۴۰Characterization and study on the latex coating used to improve the surface quality in lost foam castiongS. S. Chavoshi, M. Rezaei, S. Shakori and Y. Bahloli11th Iranian Chemical Engineering Congress2006مقاله در همایش
نمایش ۱۲۱ تا ۱۴۰ مورد از کل ۱۵۲ مورد.