رزومه وب سایت شخصی


EN
دکتر اقبال صحرایی

دکتر اقبال صحرایی

دانشیار

دانشکده: مهندسی نفت و گاز

مقطع تحصیلی: دکترای تخصصی

رزومه وب سایت شخصی
EN
دکتر اقبال صحرایی

دانشیار دکتر اقبال صحرایی

دانشکده: مهندسی نفت و گاز مقطع تحصیلی: دکترای تخصصی |

Dr. Eghbal Sahraei

Associate Professor of Petroleum Engineering
Research Projects:

  • Production of Faujasite Zeolite from Perlite.
  • A Comparison on the Relationship between Parameters of more than ten Cubic Equations of state.
  • Regeneration of Catalysts utilized in Desulphurization Unit of Refineries
  • Anaerobic treatment of Domestic Wastewater
  • Experimental study selective plugging technology by inverse emulsion for improved oil recovery in layered reservoirs

Education

Current
Associate Professor of Sahand University of Technology (SUT)

  • Ph.D: Gubkin State University of oil and gas, Moscow, Russia (Petroleum Engineering) (2005)
  • Ms.c: Shiraz University, Iran (Chemical Engineering) (1992)
  • BSc Degree: Tehran University, Iran (Chemical Engineering) (1988)

 

Technical Skills

  • Natural Gas process Engineering
  • Enhanced Oil Recovery (EOR)
  • Artificial Intelligence (AI)
  • Multiphase Flow in well
  • well completion
  • Heat Transfer

 

Contact us:

POBox: 51335/1996 Tabriz–Iran
Tel: ( +98) 412 3443800 to 10
Fax: (+98) 412 3443867
E-mail: sahraei@sut.ac.ir – sahraei@yahoo.com
Last Updated: March 23, 2024

نمایش بیشتر

سنتز یک مرحله ای نانوسیلیکای آبگریز با استفاده از الکل زنجیر بلند 1-اکتادکانول

نویسندگاندرگاهی زابلی ملیحه | صحرایی اقبال | پورعباس بهزاد | کرگل برایان
نشریهنشریۀ مهندسی متالورژی و مواد
نوع مقالهFull Paper
تاریخ انتشار۲۰۱۷
رتبه نشریهعلمی - پژوهشی
نوع نشریهچاپی
کشور محل چاپایران

چکیده مقاله

In this work, one-pot synthesis of modified silica nanoparticles with long-chain alcohol 1-Octadecanol by stober
method at 70C is presented. Hydrophobicity of particles increased dramatically by increasing the amount of 1-
Octadecanol up to 7 wt.%. Surface modification was completed during the first 90 minutes. Additional reaction time
had no further effect. The most possible modification was obtained when the reaction took place at pH=8. Successful
surface modification was confirmed by FT-IR spectroscopy, thermogravimetric analyses and contact angle
measurements. X-ray diffraction patterns indicate an amorphous structure which did not significantly change by
surface modification. Transmission electron microscopy images were used to investigate the morphology and
dimension of the silica particles.