Sasan Yazdani

Publications

 Articles Published in Journals Covered by SCI, SCI-Expanded, SSCI and AHCI

1.            S. Yazdania, S. Tekeli, T. Yilmaz, M.N. Adanir, Influence of Annealing Heat Treatment on the Microstructure and Mechanical Properties of Multilayer 316L-TiC Composite Fabricated by Selective Laser Melting, Journal of Materials Engineering and Performance, Accepted for publication, 1-15 (2024)

2.             S. Yazdani, S. Tekeli, H. Rabieifar, U. Taşci, E. Akbarzadeh, Evolution of Microstructure and mechanical properties in multi-layer 316L-TiC composite fabricated by selective laser melting additive manufacturing, Journal of central South University, Accepted for publication, 1-18 (2024)

3.             P. Farshbaf, N.P. Ahmadi, S. Yazdani, Self-healing vanadate-doped NiAl-layered double hydroxide (LDH) coatings synthesized for active corrosion protection of 2024 aluminum alloy, Mater. Today Commun., 108795 (2024) https://doi.org/10.1016/j.mtcomm.2024.108795

4.             M. Yaghoubi, N.P. Ahmadi, S. Yazdani, Fabrication of robust superhydrophobic zinc-coated steel with anti-corrosion and self-cleaning behavior through a simple nickel galvanic replacement reaction, Colloids and Surfaces A: Physicochemical and Engineering Aspects, 686, 133341 (2024) https://doi.org/10.1016/j.colsurfa.2024.133341

5.             M.N. Yoozbashi, R. Zolfaghari, S. Yazdani, S. Tekeli, Other Aspects of the Impact Fracture Toughness-Microstructure Relationship in Nano-bainitic Steels, J. Mater. Eng. Perform, 1-9 (2024)

6.             M. Hosseinzadeh Khanmiri, M. Charchi Aghdam, H. Mousalou, B. Avishan, S. Yazdani, Mechanical Properties of Step-Austempered Nanostructured Bainitic Steel with Modified Chemical Composition at Low and High Strain Rates, J. Mater., 75(9), 3911-3923 (2023) 10.1007/s11837-023-06005-z

7.             B. Avishan, R. Karimkhani Shamloo, E. Akbarzadeh Chiniforoush, S. Yazdani, Ultrafine Carbide-Free Bainite in High-Carbon Steel After Continuous Annealing with Different Cooling Rates, J. Mater. Eng. Perform, 32(11), 4922-4931 (2023) 10.1007/s11665-022-07446-4

8.             B. Avishan, P. Talebi, S. Tekeli, S. Yazdani, Producing Nanobainite on Carburized Surface of a Low-Carbon Low-Alloy Steel, J. Mater. Eng. Perform, 32(1), 211-220 (2023) 10.1007/s11665-022-07096-6

9.             A. Firouzi, S. Yazdani, R. Tavangar, B. Shakerifard, F. Khan Md, Fracture Toughness Evaluation of Powder Metallurgical ASP2030 High-Speed Steels Using Flexural Specimens and Finite Element Method, Strength Mater., 54(6), 1064-1081 (2022) 10.1007/s11223-023-00482-y

10.          A. Firouzi, S. Yazdani, R. Tavangar, B. Shakerifard, F.K. Mohammad, Austempering of PM HSS ASP2030 for improved fracture toughness, Metallurgical Research & Technology, 119(2), 211, (2022) 10.1051/metal/2022025

11.          S.A. Sajjadi, N.P. Ahmadi, S. Yazdani, Corrosion behavior of sol-gel coated amorphous alumina at different calcination temperatures, Surface & Coatings Technology, 405, 126546, (2021) 10.1016/j.surfcoat.2020.126546

12.          E. Entezari, H. Mousalou, S. Yazdani, J.L. Gonzalez-Velazquez, J.A. Szpunar, The Evaluation of Quenching Temperature Effect on Microstructural and Mechanical Properties of Advanced High Strength Low Carbon Steel After Quenching Partitioning Treatment, 4th International Conference on Structural Integrity (ICSI), Aug 30-Sep 02, 2021 (Electr Network), Elsevier Science Bv, 2022, pp 145-152 10.1016/j.prostr.2022.01.070

13.          B. Avishan, S.M. Khoshkebari, S. Yazdani, Effect of pre-existing martensite within the microstructure of nanobainitic steel on its mechanical properties, Materials Chemistry and Physics, 260, 124160, (2021) 10.1016/j.matchemphys.2020.124160

14.          P. Ashtari, N.P. Ahmadi, S. Yazdani, Isothermal oxidation kinetics of laser cladded NiCoCrAl/WC + La(2)O3 hybrid composite coatings at 700 degrees C, Kov. Mater.-Met. Mater., 59(4), 269-278 (2021) (in English) 10.4149/km20214269

15.          H. Mousalou, S. Yazdani, N.P. Ahmadi, B. Avishan, Nanostructured Carbide-Free Bainite Formation in Low Carbon Steel, Acta Metallurgica Sinica-English Letters, 33(12), 1635-1644 (2020) 10.1007/s40195-020-01091-3

16.          B. Avishan, S. Golchin, S. Yazdani, Elongation improvement in nano bainite steel obtained from plastically deformed primary austenite, Philosophical Magazine, 100(17), 2244-2261 (2020) 10.1080/14786435.2020.1764654

17.          B. Abedini, N. Parvini Ahmadi, S. Yazdani, L. Magagnin, Electrodeposition and corrosion behavior of Zn-Ni-Mn alloy coatings deposited from alkaline solution, Transactions of Nonferrous Metals Society of China, 30(2), 548-558 (2020) 10.1016/s1003-6326(20)65234-7

18.          E.A. Chiniforush, S. Yazdani, M. Mohammadi, N. Niki, Replacing martensite with nanobainite in moderately alloyed carburised steel for better wear performance, International Journal of Materials Research, 110(2), 106-113 (2019) 10.3139/146.111726

19.          B. Avishan, A. Sefidgar, S. Yazdani, High strain rate deformation of nanostructured super bainite, J. Mater. Sci., 54(4), 3455-3468 (2019) 10.1007/s10853-018-3026-5

20.          B. Abedini, N.P. Ahmadi, S. Yazdani, L. Magagnin, Structure and corrosion behavior of Zn-Ni-Mn/Zn-Ni layered alloy coatings electrodeposited under various potential regimes, Surface & Coatings Technology, 372, 260-267 (2019) 10.1016/j.surfcoat.2019.05.051

21.          H. Mousalou, S. Yazdani, B. Avishan, N.P. Ahmadi, A. Chabok, Y.T. Pei, Microstructural and mechanical properties of low-carbon ultra-fine bainitic steel produced by multi-step austempering process, Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, 734, 329-337 (2018) 10.1016/j.msea.2018.08.008

22.          E. Entezari, B. Avishan, H. Mousalou, S. Yazdani, Effect of Electro Slag Remelting (ESR) on the microstructure and mechanical properties of low carbon bainitic steel, Kov. Mater.-Met. Mater., 56(4), 253-263 (2018) (in English) 10.4149/km_2018_4_253

23.          E.A. Chiniforush, S. Yazdani, V. Nadiran, The influence of chill thickness and austempering temperature on dry sliding wear behaviour of a Cu-Ni carbidic austempered ductile iron (CADI), Kov. Mater.-Met. Mater., 56(4), 213-221 (2018) (in English) 10.4149/km_2018_4_213

24.          B. Bostani, N.P. Ahmadi, S. Yazdani, R. Arghavanian, Co-electrodeposition and properties evaluation of functionally gradient nickel coated ZrO2 composite coating, Transactions of Nonferrous Metals Society of China, 28(1), 66-76 (2018) 10.1016/s1003-6326(18)64639-4

25.          B. Bostani, N.P. Ahmadi, S. Yazdani, R. Arghavanian, Synthesis and Characterization of Functionally Gradient Ni-ZrO2 Composite Coating, Protection of Metals and Physical Chemistry of Surfaces, 54(2), 222-229 (2018) 10.1134/s2070205118020156

26.          A.F. Boostani, S. Yazdani, R.A. Khosroshahi, Z.Y. Jiang, D. Wei, A novel graphene-stimulated semi-solid processing to fabricate advanced aluminium matrix nanocomposites, Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, 736, 316-322 (2018) 10.1016/j.msea.2018.09.001

27.          B. Avishan, M.A.A. Jani, S. Yazdani, Hardenability of Nanocrystalline Bulk Steel, Trans. Indian Inst. Met., 71(2), 493-503 (2018) 10.1007/s12666-017-1180-0

28.          R.T. Mousavian, R.A. Khosroshahi, S. Yazdani, D. Brabazon, Manufacturing of cast A356 matrix composite reinforced with nano- to micrometer-sized SiC particles, Rare Metals, 36(1), 46-54 (2017) 10.1007/s12598-015-0689-9

29.          A. Haftbaradaran, N. Parvini-Ahmadi, S. Yazdani, Electrodeposition and characterization of metallic molybdenum from aqueous electrolytes containing high acetate concentrations, Surface & Coatings Technology, 324, 1-6 (2017) 10.1016/j.surfcoat.2017.05.024

30.          B. Bostani, R. Arghavanian, N.P. Ahmadi, S. Yazdani, Fabrication and properties evaluation of functionally graded Ni-NCZ composite coating, Surface & Coatings Technology, 328, 276-282 (2017) 10.1016/j.surfcoat.2017.09.004

31.          B. Avishan, M. Tavakolian, S. Yazdani, Two-step austempering of high performance steel with nanoscale microstructure, Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, 693, 178-185 (2017) 10.1016/j.msea.2017.03.104

32.          R.T. Mousavian, R.A. Khosroshahi, S. Yazdani, D. Brabazon, A.F. Boostani, Fabrication of aluminum matrix composites reinforced with nano- to micrometer-sized SiC particles, Mater. Des., 89, 58-70 (2016) 10.1016/j.matdes.2015.09.130

33.          S.A. Miab, B. Avishan, S. Yazdani, Wear Resistance of Two Nanostructural Bainitic Steels with Different Amounts of Mn and Ni, Acta Metallurgica Sinica-English Letters, 29(6), 587-594 (2016) 10.1007/s40195-016-0424-z

34.          M. Kabirmohammadi, B. Avishan, S. Yazdani, Transformation kinetics and microstructural features in Low-Temperature Bainite after ausforming process, Mater. Chem. Phys., 184, 306-317 (2016) 10.1016/j.matchemphys.2016.09.057

35.          S. Golchin, B. Avishan, S. Yazdani, Effect of 10% ausforming on impact toughness of nano bainite austempered at 300 degrees C, Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, 656, 94-101 (2016) 10.1016/j.msea.2016.01.025

36.          E.A. Chiniforush, M.A. Rahimi, S. Yazdani, Dry sliding wear of Ni alloyed austempered ductile iron, China Foundry, 13(5), 361-367 (2016) (in English) 10.1007/s41230-016-6072-0

37.          E.A. Chiniforush, N. Iranipour, S. Yazdani, Effect of nodule count and austempering heat treatment on segregation behavior of alloying elements in ductile cast iron, China Foundry, 13(3), 217-222 (2016) (in English) 10.1007/s41230-016-6034-6

38.          B. Bostani, N.P. Ahmadi, S. Yazdani, Manufacturing of functionally graded Ni-ZrO2 composite coating controlled by stirring rate of the electroplating bath, Surface Engineering, 32(7), 495-500 (2016) 10.1080/02670844.2016.1148307

39.          A.F. Boostani, S. Tahamtan, S. Yazdani, R.A. Khosroshahi, D. Wei, H. Sahamirad, X.M. Zhang, Z.Y. Jiang, Graphene tweaking Hamaker constant of SiC nanoparticles: A new horizon to solve the conflict between strengthening and toughening, Scripta Materialia, 118, 65-69 (2016) 10.1016/j.scriptamat.2016.02.028

40.          A.F. Boostani, R.T. Mousavian, S. Tahamtan, S. Yazdani, R.A. Khosroshahi, D. Wei, J. Xu, X. Zhang, Z.Y. Jiang, Solvothermal-assisted graphene encapsulation of SiC nanoparticles: A new horizon toward toughening aluminium matrix nanocomposites, Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, 653, 99-107 (2016) 10.1016/j.msea.2015.12.008

41.          M.N. Yoozbashi, S. Yazdani, XRD and TEM study of bainitic ferrite plate thickness in nanostructured, carbide free bainitic steels, Mater. Chem. Phys., 160, 148-154 (2015) 10.1016/j.matchemphys.2015.03.071

42.          A.F. Boostani, S. Yazdani, R.T. Mousavian, S. Tahamtan, R.A. Khosroshahi, D. Wei, D. Brabazon, J.Z. Xu, X.M. Zhang, Z.Y. Jiang, Strengthening mechanisms of graphene sheets in aluminium matrix nanocomposites, Mater. Des., 88, 983-989 (2015) 10.1016/j.matdes.2015.09.063

43.          A.F. Boostani, S. Tahamtan, Z.Y. Jiang, D. Wei, S. Yazdani, R.A. Khosroshahi, R.T. Mousavian, J. Xu, X. Zhang, D. Gong, Enhanced tensile properties of aluminium matrix composites reinforced with graphene encapsulated SiC nanoparticles, Composites Part a-Applied Science and Manufacturing, 68, 155-163 (2015) 10.1016/j.compositesa.2014.10.010

44.          A.F. Boostani, R.T. Mousavian, S. Tahamtan, S. Yazdani, R.A. Khosroshahi, D. Wei, J.Z. Xu, D. Gong, X.M. Zhang, Z.Y. Jiang, Graphene sheets encapsulating SiC nanoparticles: A roadmap towards enhancing tensile ductility of metal matrix composites, Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, 648, 92-103 (2015) 10.1016/j.msea.2015.09.050

45.          B.R. Shendy, M.N. Yoozbashi, B. Avishan, S. Yazdani, An Investigation on Rotating Bending Fatigue Behavior of Nanostructured Low-Temperature Bainitic Steel, Acta Metallurgica Sinica-English Letters, 27(2), 233-238 (2014) 10.1007/s40195-014-0044-4

46.          B. Avishan, C. Garcia-Mateo, S. Yazdani, F.G. Caballero, Retained austenite thermal stability in a nanostructured bainitic steel, Mater. Charact., 81, 105-110 (2013) 10.1016/j.matchar.2013.04.015

47.          B. Avishan, C. Garcia-Mateo, L. Morales-Rivas, S. Yazdani, F.G. Caballero, Strengthening and mechanical stability mechanisms in nanostructured bainite, J. Mater. Sci., 48(18), 6121-6132 (2013) 10.1007/s10853-013-7408-4

48.          B. Avishan, S. Yazdani, S.H. Nedjad, Toughness variations in nanostructured bainitic steels, Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, 548, 106-111 (2012) 10.1016/j.msea.2012.03.098

49.          R. Arghavanian, N.P. Ahmadi, S. Yazdani, B. Bostani, Investigations on corrosion proceeding path and EIS of Ni-ZrO2 composite coating, Surface Engineering, 28(7), 508-512 (2012) 10.1179/1743294412y.0000000010

50.          R. Arghavanian, N.P. Ahmadi, S. Yazdani, B. Bostani, Fabrication and characterisation of nickel coated Ni-NCZ (nickel coated ZrO2) composite coating, Surface Engineering, 28(7), 503-507 (2012) 10.1179/1743294412y.0000000003

51.          M.N. Yoozbashi, S. Yazdani, T.S. Wang, Design of a new nanostructured, high-Si bainitic steel with lower cost production, Mater. Des., 32(6), 3248-3253 (2011) 10.1016/j.matdes.2011.02.031

52.          A.S. Benam, S. Yazdani, B. Avishan, Effect of shot peening process on fatigue behavior of an alloyed austempered ductile iron, China Foundry, 8(3), 325-330 (2011)

53.          B. Avishan, S. Yazdani, D.J. Vahid, Effect of austempering temperature on machinability of Cu-Ni-Mo alloyed austempered ductile iron for heavy section parts, International Journal of Cast Metals Research, 24(1), 22-27 (2011) 10.1179/136404610x12816241546654

54.          M.N. Yoozbashi, S. Yazdani, Mechanical properties of nanostructured, low temperature bainitic steel designed using a thermodynamic model, Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, 527(13-14), 3200-3205 (2010) 10.1016/j.msea.2010.01.080

55.          M.N. Yoozbashi, S. Yazdani, Acceleration of bainitic transformation in nanostructured, low temperature bainitic steels by using of thermodynamic model, International Conference on Solid-Solid Phase Transformations in Inorganic Materials (PTM 2010), Jun 06-11, 2010 (Avignon, FRANCE), 2011, pp 214-220 10.4028/www.scientific.net/SSP.172-174.214

56.          S. Yazdani, A.S. Benam, B. Avishan, Effect of Austempering Temperature on High Cycle Fatigue Behavior of an Austempered Ductile Iron (ADI), 9th International Symposium on Science and Processing of Cast Iron, Nov 10-13, 2010 (Luxor, EGYPT), 2011, pp 493-498 10.4028/www.scientific.net/KEM.457.493

57.          S.H. Nedjad, S. Meimandi, A. Mahmoudi, T. Abedi, S. Yazdani, H. Shirazi, M.N. Ahmadabadi, Effect of aging on the microstructure and tensile properties of Fe-Ni-Mn-Cr maraging alloys, Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, 501(1-2), 182-187 (2009) 10.1016/j.msea.2008.09.062

58.          B. Avishan, S. Yazdani, D.J. Vahid, The influence of depth of cut on the machinability of an alloyed austempered ductile iron, Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, 523(1-2), 93-98 (2009) 10.1016/j.msea.2009.05.044

59.          S.H. Meimandi, S.H. Nedjad, S. Yazdani, M.N. Ahmadabadi, Tms, EFFECT OF CHROMIUM ADDITION ON THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF Fe-10Ni-6Cr-2Mn MARAGING STEELS, Conference on New Developments on Metallurgy and Applications of High Strength Steels, May 26-28, 2008 (Buenos Aires, ARGENTINA), 2008, pp 1151-+

60.          S. Yazdania, N. Yoozbashi, A. Ebrahimi, Enhancement of fatigue strength of SAE 1045 steel by tempering treatment and shot peening, 6th Pacific Rim International Conference on Advanced Materials and Processing, Nov 05-09, 2007 (Cheju Isl, SOUTH KOREA), 2007, pp 41-44 10.4028/www.scientific.net/MSF.561-565.41

61.          S. Yazdani, N. Parvini-Ahmadi, T. Saeid, Fatigue properties of a Ck45 steel coated with a post-heat treated Ni-Cu-P electroless deposit, Advanced Materials Forum Iii, Pts 1 and 2ed., P.M. Vilarinho, Ed., 2006, p 574-578

62.          S. Yazdani, The influence of austempering heat treatment variables on dimensional changes of a Ni-Cu ductile iron, Advanced Materials Forum Iii, Pts 1 and 2ed., P.M. Vilarinho, Ed., 2006, p 702-706

63.          T. Saeid, S. Yazdani, N. Parvini-Ahmadi, Fatigue properties of a Ck45 steel coated with a post-heat treated Ni-Cu-P electroless deposit, Surface & Coatings Technology, 200(20-21), 5789-5793 (2006) 10.1016/j.surfcoat.2005.08.146

64.          S. Yazdani, M.A. Rahimi, Wear behavior of an austempered ductile iron containing Mo-Ni-Cu, Pricm 5: The Fifth Pacific Rim International Conference on Advanced Materials and Processing, Pts 1-5ed., Z.Y. Zhong, H. Saka, T.H. Kim, E.A. Holm, Y.F. Han, X.S. Xie, Eds., 2005, p 199-202

65.          S. Yazdani, A. Firouzi, Influence of heat treatment on fatigue behavior of a Cu-Ni alloyed austempered ductile iron, Thermec'2003, Pts 1-5ed., T. Chandra, J.M. Torralba, T. Sakai, Eds., 2003, p 925-930

66.          S. Yazdani, H. Bayati, R. Elliott, The influence of cobalt on the austempering reaction in ductile cast iron, International Journal of Cast Metals Research, 13(6), 317-326 (2001) 10.1080/13640461.2001.11819413

67.          S. Yazdani, R. Elliott, Influence of molybdenum on austempering behaviour of ductile iron - Part 1 - Austempering kinetics and mechanical properties of ductile iron containing 0-13%Mo, Mater. Sci. Technol., 15(5), 531-540 (1999) 10.1179/026708399101506247

68.          S. Yazdani, R. Elliott, Influence of molybdenum on austempering behaviour of ductile iron - Part 2 - Influence of austenitising temperature on austempering kinetics, mechanical properties, and hardenability of ductile iron containing 0-13%Mo, Mater. Sci. Technol., 15(5), 541-546 (1999) 10.1179/026708399101506076

69.          S. Yazdani, R. Elliott, Influence of molybdenum on austempering behaviour of ductile iron - Part 3 - Austempering kinetics, mechanical properties, and hardenability of ductile iron containing 0.25%Mo, Mater. Sci. Technol., 15(8), 885-895 (1999) 10.1179/026708399101506689

70.          S. Yazdani, R. Elliott, Influence of molybdenum on austempering behaviour of ductile iron - Part 4 - Austempering behaviour of ductile iron containing 0.45%Mo, Mater. Sci. Technol., 15(8), 896-902 (1999) 10.1179/026708399101506698

71.          P. Ashtari, N. Parvini Ahmadi, S. Yazdani, Wear behavior of laser cladded Ni based-WC-La2O3 hybrid composite coating on H13-Steel at elevated and ambient temperatures, International Journal of Iron & Steel Society of Iran, 18(1), 83-97 (2021)

72.          M. Yoozbashi, S. Yazdani, Effects of Pretreatment Prior to Electroless Ni-P Plating on Fatigue Behavior of SAE 1045 Steel, International Journal of Iron & Steel Society of Iran, 16(1), 9-13 (2019)

73.          M. Yoozbashi, T. Hajiloo, E. Akbarzadeh, S. Yazdani, Mechanical stability of retained austenite in the nanostructured, carbide free bainitic steels during tensile testing and cold rolling process, International Journal of Iron & Steel Society of Iran, 14(2), 27-32 (2017)

74.          R. Arghavanian, N.P. Ahmadi, S. Yazdani, Investigation On The Corrosion Properties Of Co- Electrodeposited Ni-Zro2 Composite Coating Usig Eis, Iranian Journal of Surface Science and Engineering, (15), 81-88 (2012)

75.          H. Moosalu, A. Noori Teymorlu, N. Parvini Ahmadi, S. Yazdani, Investigation of Transformation Induced Plasticity in High Al–low Si TRIP Steel, International Journal of Iron & Steel Society of Iran, 9(1), 11-14 (2012)

76.          M. Yoozbashi, S. Yazdani, T. Wang, The effects of chemical composition variations on microstructure and mechanical properties of nanostructured, low temperature bainitic steels, International Journal of Iron & Steel Society of Iran, 7(2), 6-11 (2010)

77.          A. Arefi, H. Sabet, S. Yazdani, The effect of silicon content and austempering time on DBTT of ADI, Advanced Processes in Materials, 4(3 (14)), 45-52 (2010)

78.          S. Yazdani, R. Elliott, Mo Alloyed austempered Ductile Iron, Thermomechanical processing and mechanical properties of hypereutectoid steels and cast irons, D.R. Lesuer, C.K. Syn, O.D. Sherby Eds., 1997 (1997 TMS-ASM Materials Week in Indianapolis, Indiana, September 14-18, 1997), TMS, p 267

79.          S. Yazdani, N. Varahram, S. Nategh, P. Davami, Evaluating physical and mechanical properties of direct austempered ductile iron, RikhTegary, 14(4), 137-155 (1994)