Laboratory of Advanced Welding and Joining
Research Interests
- Numerical Simulation of Arc Welding, WA-DED, Laser Welding
- Wire Arc Additive Manufacturing (WAAM)
- Materials Science in Manufacturing
Articles
| # | Paper Title | Authors | Publication/Conference | Date | Type |
|---|---|---|---|---|---|
| 1 | Microstructural engineering of crack-free and corrosion-resistant weld interfaces in gray cast iron surface repairs using IP-GMAW | V. Ziaei Laleh, H. Hamed Zargari, S. Mahdavi, H. Rashedi | Journal of Welding Science and Technology of Iran | 2026 | Article In Publication |
| 2 | Microstructure and mechanical properties of thinwalled SS316L fabricated by IP-GMAW-based via WAAM | V. Ziaei Laleh, H. Hamed Zargari, J. Sartibi | Journal of Welding Science and Technology of Iran | 2026 | Article In Publication |
| 3 | Fatigue life improvement of lap-fillet-welded UHSS by controlling the weld metal shape and welding wire Cr content | K. Toda, R. Suzuki, Y. Hoshino, K. Ito, S. Min Hong, H. Hamed Zargari, S. Ozawa | Welding in the World | 2026 | Article In Publication |
| 4 | Effect of Build Orientation on Laser Welding Characteristics of SLM-Fabricated Ti-6Al-4V Components | B. Kondori, A. Mostafapour, H. Hamed Zargari | Journal of Materials Engineering and Performance | 2026 | Article In Publication |
| 5 | Microstructural evolution, mechanical properties, and corrosion behavior of dissimilar gas metal arc welded (GMAW) CoCrFeMnNi high entropy alloy and 304 stainless steel using ER316L filler metal | F. Habibi, Y. Ahmadkhanpour, H. Hamed Zargari, P. Farshbaf | Results in Engineering | 2026 | Article In Publication |
| 6 | A long-term and pragmatic numerical simulation of wire arc additively manufactured ER70S6 and ER316L thin-wall via finite difference method | H. Hamed Zargari, S.A. Khajeh Mohammadilar, V. Ziae Laleh | Progress in Additive Manufacturing | 2025 | Article In Publication |
| 7 | A Sustainable Strategy for Wire Arc Additive Manufacturing of High-Performance Duplex Stainless Steel: Microstructural Refinement and Mechanical Anisotropy Reduction | E. Akbarzadeh Chiniforoush, H. Hamed Zargari, M.R. Jandaghi, J. Moverare, R. Warsi, C.Hakan Gür | Materials Science and Engineering: A | 2025 | Article In Publication |
| 8 | Dissimilar laser welding of Ti-CP4 to MP35N medium-entropy bio-alloy | H. Hamed Zargari, Sh. Zand, M. Rezayat | Welding in the World | 2025 | Article In Publication |
| 9 | Predictive tools for the cooling rate-dependent microstructure evolution of AISI 316L stainless steel in additive manufacturing | A. Abdali, S. Hossein Nedjad, H. Hamed Zargari, A. Saboori, M. Yildiz | Journal of Materials Research and Technology | 2024 | Article In Publication |
| 10 | Flux Enhancement with Titanium or Vanadium Oxides Addition for Superior Submerged Arc Welding of HSLA Steel Plates | M. Malekinia, H. Hamed Zargari, Kazuhiro Ito, S. Hossein Nedjad | Journal of Advanced Joining Processes | 2024 | Article In Publication |
| 11 | Medium-carbon dual-phase steels with spheroidized ferrite matrix | A. Siyahtiri, S. Hossein Nedjad, H. Hamed Zargari, Kazuhiro Ito | Journal of Materials Research and Technology | 2024 | Article In Publication |
| 12 | Wire Arc Additive Manufactured Radial Thin Wall: Fabrication Strategy, Macroscopic Defect Control, Microstructure, and Mechanical Properties | H. Hamed Zargari, Vahid Ziae Laleh | Journal of Materials Engineering and Performance | 2024 | Article In Publication |
| 13 | Effect of workpiece vibration frequency on heat distribution and material flow in the molten pool in tandem-pulsed gas metal arc welding | H. Hamed Zargari, K. ITO, A. Sharma | The International Journal of Advanced Manufacturing Technology | 2023 | Article In Publication |
| 14 | Visualizing the vibration effect on the tandem-pulsed gas metal arc welding in the presence of surface tension active elements | H. Hamed Zargari, K. ITO, M. Kumar, A. Sharma | International Journal of Heat and Mass Transfer | 2020 | Article In Publication |
| 15 | Metallurgical characterization of penetration shape change in workpiece vibration-assisted tandem-pulsed gas metal arc welding | H. Hamed Zargari, K.ITO, T. Miwa, P. Kumar Parchuri, H. Yamamoto, A. Sharma | Materials | 2020 | Article In Publication |
| 16 | A unique CEL numerical method on material flow in a molten pool of workpiece vibration assisted welding | H. Hamed Zargari, K. ITO, Y. Mikami, A. Sharma | JOURNAL OF THE JAPAN WELDING SOCIETY | 2020 | Article In Publication |
| 17 | Cold rolling and intercritical annealing of C-Mn steel sheets with different initial microstructures | Y. Karimi, S. Hossein Nedjad, H. Shirazi, M. Nili Ahmadabadi, H. Hamed Zargari, K. ITO | Materials Science and Engineering: A | 2018 | Article In Publication |
| 18 | Microstructure and Mechanical Properties of Mn-Containing Maraging Steels | H. Hamed Zargari, S. Hossein Nedjad | Journal of Materials Engineering and Performance | 2015 | Article In Publication |
| 19 | Transformation Mechanism of Preprecipitation NiMn Nanostructures | M. R. Movaghar, S. Hossein Nedjad, H. Hamed Zargari, M. Nili Ahmadabadi | Metallurgical and Materials Transactions A | 2013 | Article In Publication |
Showing 1-19 of 19 items.