لیست مقالات در همایشها
نمایش ۶۰۱ تا ۶۲۰ مورد از کل ۶۸۰ مورد.
| عنوان مقاله | همایش | محل برگزاری همایش | نویسندگان |
|---|---|---|---|
| Long-term Performance of Rigid Polyurethane Foam Prepared with Different Blowing Agents | 9th International Seminar on Polymer Science and Technology | Tehran | A. R. Eyvazzadeh Kalejahi, M. Rezaei |
| Thermal Degradation Behavior of Polyacrylamide Gel | 9th International Seminar on Polymer Science and Technology | Tehran | M. Rakhshani, A.A. Babaluo, M.M.Kamrannejad, M. Rezaei, and M.k. RazaviAghjeh |
| Thermal degradation behavior of MMA-St copolymer and EPS foams used in lost foam casting process | Polymer Processing Society-25 | Goa, India | H. R. Azimi, M. Rezaei, F. Abasi |
| Rigid Polyurethane Foam Blown with Alternative Blowing Agents: Microstructure, Mechanical and Thermal Properties | Polymer Processing Society-25 | Goa, India | E. Esmaeilnezhad, M. Rezaei, M. K. Razavi |
| Modeling of Gap Geometry and Pressure in Expandable Polystyrene Lost Foam Casting Process | Polymer Processing Society-25 | Goa, India | A. Charchi, M. Rezaei, S. Hossainpour, M. Abarzani and H. R. Azimi |
| Relationship between Mechanical properties and Microstructure of Rigid Polyurethane Foams with Alternative Blowing Agents | The 5th International Chemical Engineering Congress | Kish Island | E. Esmaeilnezhad, M. Rezaei, S.Shakoori and M.¬Khanzadeh |
| Drying Kinetics and Thermal Properties of Polymer Latex Coating Used in Lost foam Casting | The 5th International Chemical Engineering Congress | Kish Island | S. Shakoori, M. Rezaei, F. Abbasi, E. Esmaeilnezhad and Y. Bahloli |
| Isokinetic Relationships to Evaluate Thermal Degradation Kinetics Parameters of MMA-St Copolymer and EPS Lost Foams | 12th Iranian Chemical Engineering Congress | Tabriz | Hamid Reza Azimi, Mostafa Rezaei, Farhang Abbasi, Yahya Bahluli |
| Investigation of the effect of Microstructure and Density on the thermal properties of ridid Polyurethane Foams with Alternative Blowing Agents | 12th Iranian Chemical Engineering Congress | Tabriz | Esmaeilnezhad, Mostafa Rezaei, Mir Karim Razavi aghjeh, Mohsen Khanzadeh |
| Kinetics of thermal degradation of MMA-St and EPS lost foams in non-isothermal condition | 42nd world polymer congress | Taipei | H. R. Azimi,M. Rezaei, F. Abbasi, A. Charchi, Y. Bahluli |
| Film Formation and Drying Kinetics of Polymer Latex Coatings Used in Lost foam Casting | 42nd world polymer congress | Taipei | S. Shakoori,M. Rezaei, F. Abbasi, E.Esmaeilnezhad |
| Alternative Ozone Friendly Blowing Agents to CFC's in Rigid Polyurethane Foams: Compressive Strength, Creep and Stress Relaxation Behavior | 42nd world polymer congress | Taipei | E. Esmaeilnezhad, M. Rezaei, M. K. Razavi Aghjeh, S. Shakoori, M.Khanzadeh |
| Thermal Properties, Rheology and Morphology of Polymer Latex Coating Used in Lost Foam Casting | 8th International Seminar on Polymer Science and Technology | Tehran | S. S. Chavoshi, M. Rezaei, S. Shakori and Y. Bahloli |
| Gamma-Irradiationgraft copolymerization of MMA monomer onto UHMWPE | 8th International Seminar on Polymer Science and Technology | Tehran | H. G. Kalteh, M. Rezaei, F. Abbasiand N. Sheikh |
| Characterization and study on the latex coating used to improve the surface quality in lost foam castiong | 11th Iranian Chemical Engineering Congress | Tehran | S. S. Chavoshi, M. Rezaei, S. Shakori and Y. Bahloli |
| Gamma radiation grafting of acrylate groups onto the UHMWPE surface | 11th Iranian Chemical Engineering Congress | Tehran | H. G. Kalteh, M. Rezaei, K. Jarrahian and N. Sheikh |
| Thermal analysis of acrylamide polymeric network used for nanopowders preparation | 11th Iranian Chemical Engineering Congress | Tehran | M. Thamasebpour, A. A. Babalou, M. Rezaei and M. K. Razavi |
| Temperature Dependance of melt rheology of UHMWPE/PET composite | 4th International Seminar on Polymer Science and Technology | Tehran | M. Rezaei, N. G. Ebrahimi, M. Kontopoulou, M. H. Navid Famili and S. Namjoo Nik |
| Study on Wear properties of UHMWPE/PET composite as a substitute to UHMWPE in artificial joints | 12th Iranian Conference on Biomedical Engineering | Tabriz | M. Rezaei, N. G. Ebrahimi |
| Sintering parameters of UHMWPE composites used in artificial joints | 7th world Biomaterials Congress | Sydney, Australia | M. Rezaei and N.G. Ebrahimi |